SPC flooring T-Moulding (2m)

Firefly Interiors SPC Flooring specification

• Thickness: 4.0mm
• Size: 1220mm x 180mm
• Wear layer: 0.3mm
• Weight: 1.8kg per sheet / 8.2kg per sqm
• Supplied in boxes of 8 pieces (1.72 sqm)

SPC FLOORING INSTALLATION

The installation of SPC Flooring is a relatively simple DIY project that you can do yourself. To start off, ensure the subfloors are complete
level and smooth. Fill any small dents and sand down protruding parts of the surface if necessary. The boards are cut in a way that each
subsequent piece will have grooves that click into one another. This means the entire floor will not need an adhesive or nails to stay in
place, giving you a no mess, no fuss experience.

Preparations

1. Concrete (or Wooden) subfloor must be clean, dry and structurally sound.
2. The installation of the SPC flooring requires a higher level of flatness of the subfloor. It is advisable to do self-leveling cement job before installing the SPC flooring for uneven subfloor. Concrete (or Wooden) subfloors should be flat and leveled with a tolerance level of 1.0 mm only per 3.3 meters radius.
3. Concrete subfloor must be fully cured for at least 60 days prior to SPC flooring installation.
4. All necessary subfloor patching must be done with a non-shrinking, water-resistant filler.
5. Something like carpet, cushion vinyl, polish, paint, dirt and particle should be removed from the job surface.
6. Maintain the room temperature above 15°C before installation.
7. Check whether the doors can be still opened or closed after flooring has been installed (minimum 1 cm).

Key installation considerations

1. Use an underlayment (1.0/1.5 mm) rather than installing the SPC flooring directly on the substrate/subfloor. Underlayment is
   not allowed to be more than one layer/sheet. Any rubber mats or glue cushions are prohibited from replacing underlayment.
2. Do not install the SPC flooring over your existing flooring, tile, cushion vinyl, carpet or mat, as SPC flooring cannot effectively
   bridge over or smooth out substrate imperfections in the way that thicker, inflexible floor coverings can. If surface is flat and
   leveled, and has no embossing, and grout lines are very thin, the tile floor can be used for a proper substrate.
3. Should absolutely never ignore expansion space throughout installation of the SPC flooring. Allow a minimum 6.0 mm
   expansion gap around the entire perimeter of the room and all vertical obstructions. Large spans exceeding 6 m in the SPC
   flooring width, should require the addition of internal or field expansion. This can be accomplished by using spacers, such as
   small T-moldings. If installing the SPC flooring multiple rooms it is highly recommended that T-moldings be used to separate
   rooms.
4. Never nail, screw or glue the SPC flooring down, as well as any other fixture.
5. Do not install the SPC flooring in areas that are permanently exposed to the sun.
6. Ensure that all installing products must be in the consistent batch number.
7. Position the SPC flooring plank to be installed at an angle of 15° to 20° to the plank already installed. Move the plank gently up and down and at the same time exert forward pressure. The planks will automatically click into place. You can either insert the tongue into the groove, or the groove into the tongue.

Shipping

Orders over R5000 qualify for free shipping. On orders under R5000, a R650 shipping fee will apply.

Delivery to main towns and city centres will take 3 – 5 working days. Outlying areas 5 – 7 working days. We deliver door to door via our chosen courier service.

All parcels are dispatched with a tracking number. Once your parcel is dispatched a tracking number will be emailed to you.

Returns Policy

You may return most new, unopened items within 7 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.)

The items need to be returned in an unused condition and in their original sealed packaging. You may be liable for the direct costs of returning the goods. All returned items are subject to inspection to ensure they are suitable for a refund.

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail to arrange collection of the items.